Synthesis of New Pb-Based 1222 Cuprates Containing Phosphorus, (Pb0.75P0.25)Sr2(RE2–x–y Ce x Sr y )Cu2O z (RE = Nd, Sm, Eu, Gd, Dy, Ho, Er, Tm, Yb, and Y)

New Pb-based 1222 cuprates containing phosphorus have been synthesized in the (Pb_0.75P_0.25)Sr₂- (RE_2–x–y Ce _x Sr _y )Cu₂O _z (RE = Nd, Sm, Eu, Gd, Dy, Ho, Er, Tm, Yb, and Y) systems. The almost-single phase samples are obtained for 0.5≤x≤1.0 and y=0.1 in the cases of RE = Nd, Dy, Ho, Er, Tm, Yb and Y, while for 0.3≤x≤1.0 and y=0.1 in the cases of RE = Sm, Eu and Gd. The samples crystallize in a tetragonal lattice, the lattice parameters a and c are decreasing with the decrease of the ionic radius of the RE element. Even after annealing under 143 atm O₂ atmosphere at 400 °C, almost all the samples with the common values x=0.5 and y=0.1 are semiconductors with a transport process followed by three-dimensional variable range hopping. However, the samples of RE = Sm, Eu and Gd, which are of almost single 1222 phase, even for x=0.3 and y=0.1, show superconductivity with the onsets at about 25 K, 20 K and 22 K, respectively. Through this study, we find very important procedure for discovery of new superconducting 1222 compound.     

Diffusion Magnetic Resonance Imaging-Based Biomarkers for Neurodegenerative Diseases

There has been an increasing prevalence of neurodegenerative diseases with the rapid increase in aging societies worldwide. Biomarkers that can be used to detect pathological changes before the development of severe neuronal loss and consequently facilitate early intervention with disease-modifying therapeutic modalities are therefore urgently needed. Diffusion magnetic resonance imaging (MRI) is a promising tool that can be used to infer microstructural characteristics of the brain, such as microstructural integrity and complexity, as well as axonal density, order, and myelination, through the utilization of water molecules that are diffused within the tissue, with displacement at the micron scale. Diffusion tensor imaging is the most commonly used diffusion MRI technique to assess the pathophysiology of neurodegenerative diseases. However, diffusion tensor imaging has several limitations, and new technologies, including neurite orientation dispersion and density imaging, diffusion kurtosis imaging, and free-water imaging, have been recently developed as approaches to overcome these constraints. This review provides an overview of these technologies and their potential as biomarkers for the early diagnosis and disease progression of major neurodegenerative diseases.     

Development of a simple capillary electrophoretic determination of glucosamine in nutritional supplements using in-capillary derivatisation with o-phthalaldehyde

A simple capillary electrophoretic method was developed for the determination of glucosamine using in-capillary derivatisation. Glucosamine in commercial products was extracted with purified water. The CE separation was achieved on an uncoated fused-silica capillary using a 20 mM borate buffer (pH 9.2) containing 5 mM o-phthalaldehyde (OPA) and 5 mM 3-mercaptopropionic acid (MPA) at 25 kV, followed by UV detection at 340 nm. The detector response was linear (r² > 0.999) in the concentration range 10–1000 μg/mL. The limit of detection (LOD) was 1.3 mg/g. Spiked glucosamine recoveries at 50 and 100 mg/g level were 95.1% and 104.3%, respectively. The method was applied to 16 commercial products. The concentrations of glucosamine were 109–705 mg/g, and the ratios of detected glucosamine content to the labelled value were 88.8–124%. No significant bias was observed (r² = 0.989, p < 0.01), between results obtained by the proposed CE method and an official colorimetric method (Japanese Health Food & Nutrition Food Association).     

A FAST METHOD OF RADIATIVE HEAT TRANSFER ANALYSIS BETWEEN ARBITRARY THREE-DIMENSIONAL BODIES COMPOSED OF SPECULAR AND DIFFUSE SURFACES

The radiation element method by ray emission model (REM²) has been improved by using the law of reciprocity for the specular view factor and the incomplete Cholesky conjugate gradient (ICCG) method to reduce computational time. This improved method was applied to analyze the radiative heat transfer between arbitrary three-dimensional bodies composed of specular and diffuse surfaces. The accuracy of the improved method was evaluated by comparing analytical solutions. And the method was used to calculate radiative heat transfer between machine elements and heater panels. CPU time to calculate the radiative exchange for a model composed of 3193 elements was reduced to 1/430 of that by the previous numerical method using a decomposition method.     

Inhibitory Effect of 8‐Halogenated 7‐Deaza‐2′‐deoxyguanosine Triphosphates on Human 8‐Oxo‐2′‐deoxyguanosine Triphosphatase,hMTH1, Activities

hMTH1 (8‐oxo‐2′‐deoxyguanine triphosphatase) hydrolyzes oxidized nucleoside triphosphates; its presence is non‐essential for survival of normal cells but is required for survival of cancer cells. In this study, 8‐halogenated‐7‐deaza‐2′‐deoxyguanosine triphosphate (8‐halogenated‐7‐deazadGTP) derivatives were synthesized. Interestingly, these triphosphates were poor substrates for hMTH1, but exhibited strong competitive inhibition against hMTH1 at nanomolar levels. This inhibitory effect is attributed to slower rate of hydrolysis, possibly arising from enzyme structural changes, specifically different stacking interactions with 8‐halogenated‐7‐deazadGTP. This is the first example of using nucleotide derivatives to inhibit hMTH1, thus demonstrating their potential as antitumor agents.     

Main‐chain smectic liquid crystalline polymer exhibiting unusually high thermal conductivity in an isotropic composite

The thermal conductivity (TC) of an isotropic composite comprising of a main‐chain smectic liquid crystalline PB‐10 polyester and 50‐μm‐sized roughly spherical magnesium oxide (MgO) particles is investigated. The increase in the composite TC with higher MgO fractions is steeper than that expected by Bruggeman's theory for the TC of a polydomain PB‐10 polyester (0.52 W m^?1 K^?1). When the filler content is larger than 30 vol %, the composite TC approaches a value that can be explained only if the polyester functions as a matrix with 1.0 W m^?1 K^?1, which is five times as high as those of isotropic common polymers (0.2 W m^?1 K^?1). Such an unusually high TC for a polymer matrix is attributed to some polymer lamellae that lie parallel to the particle surface and are stacked toward neighboring particles, thus creating effective heat paths between the particles and a continuous thermal network in a composite. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 39896.     

Efficient electron transport in 4,4′-bis[N-(1-napthyl)-N-phenyl-amino] biphenyl and the applications in white organic light emitting devices

The electron transport capability of 4,4′-bis[N-(1-napthyl)-N-phenyl-amino] biphenyl (α-NPD) was investigated by fundamental physical measurements named as current–voltage (I–V) electrical property evaluation and displacement current measurement (DCM). In electron-dominated devices, the I–V characteristics of α-NPD were similar as that of (8-hydroxyquinolino) aluminum (Alq₃) owing to their same order of electron mobilities. The interface of Al/LiF and α-NPD was proven to be an Ohmic contact through the evaluation of I–V characteristics at low bias regime (<3 V). And an electron injection barrier, 0.21 eV, at Al/LiF/α-NPD was obtained by extrapolating the temperature dependent I–V curves. The electron transport behavior in α-NPD film was further confirmed by DCM evaluations. Furthermore, an efficient white organic light emission device was successfully fabricated by using α-NPD as hole transport layer and electron transport layer, respectively.     

Zinc Dialkyl Phosphate (<Emphasis Type="Bold">ZP</Emphasis>) as an Anti-Wear Additive: Comparison with <Emphasis Type="Bold">ZDDP</Emphasis>

In this study, we are interested in the anti-wear properties of zinc dialkyl phosphate additive (ZP) in comparison with ‘classical’ zinc dialkyldithiophosphate (ZDDP). Friction tests were performed on a reciprocating tribometer using both ball-on-flat and cylinder-on-flat configurations under a Hertzian contact pressure of 0.9 GPa. Experiments were carried out as a function of temperature (25 and 100 °C), sliding speed (25, 50 and 100 mm/s) and additives concentrations. Ball wear scar diameters as well as friction coefficient were measured. In order to better understand the anti-wear mechanisms of these additives, friction tests were followed by surface analyses such as AES (Auger Electron Spectroscopy) and XPS (X-Ray Photoelectron Spectroscopy). Transmission Electron Microscopy (TEM) observations of the ZDDP and ZP tribofilms were also carried out to visualise the generated layers. The anti-wear capability of ZP molecule is discussed.     

Surface‐discharge electrode design methods for ACPDPs

Abstract— In order to lower development costs and to shorten development time, small panels, under 10‐in on the diagonal, are used for the experiments to improve the luminous efficiency of plasma‐display panels. However, it is difficult to show the same results as those of large panels, over 40 in. on the diagonal. In this paper, first, we show that the luminous efficiency and the voltage margin of mini‐panels are not obtained with large panels by using an actual 46‐in. PDP. The reason is that the resistance in the large panels is larger than that in the mini panels and the voltage drop in the large panels are larger than in mini‐panels. Therefore, we conclude that the bus electrode width and the transparent electrode width are important factors in the design of large PDPs. Next, we show the technique of designing large panels by using a database obtained from mini‐panels. The estimated cell‐design results show good agreement with an actual 46‐in. PDP in luminous efficiency and minimum sustain voltage. We show that a desired large PDP can be obtained by using the cell design proposed in the present paper.